nome.gif (8681 bytes)

8mm "ULTRA RACING" Silicon Insulation - Low Resistance - Magnetic Wire -

Quality classifyed with Class F "The highest on the market"

" Ultra High Performance Ignition Up-Grade"

Ultra High Performance 8 mm (grey colour) Silicon Low Resistance
Spark Plug Cables with both spark plugs and distributor /or coil connections made of Silicon.

Left example installation on vintage mercedes 6 cylinders KIT Electronic Ignition-Supercoil-
Ignition Wires -TM Spark Plugs

E-mail info@torquemaster.biz

Better Cylinder Combustion Resulting in More Power (average10%)- Less Fuel Consuption (Often 12%) - Cleaner Exhaust Emissions -

For all engines - Particularly Suggested on Modifyed Engines -Tired Engines with Many Kilometers Done - Engines With LPG or CNG Systems

Ultra High Performance 8 mm (grey colour) Silicon Low Resistance Spark Plug Cables with both spark plugs and distributor /or coil connections made of Silicon.They guarantee Ultra High Conductivity and Maximum Amperage to the Spark Plugs .Silicon Jacket Insulation for best reliability - better engine starts and maximum performance.

Super Coil - Tested with other super coils it resulted to be the best. It gives more voltage, energy with high milliamps to the spark plugs. The performance continues even at high engine rpm. It can be installed on ignition systems which have the coil separated from the ignition distributor.The installation is easy and without modifications.To up-grade DIS Dual Spark Ignitions our Super DIS Coil will be Applicable (on the right of the picture).Direct Plug In for Ford Engines with This Type of Ignitions.The DIS Up-Grade is available also with 2 Single Dual Spark Coils.

Torque Master "Field Effect" Spark Plugs. They give to the air/fuel mixture a more exposed "3/4 times" spark than a standard plug and at 360 degrees. The engine will have better torque and increased overall engine performance. Guaranteed minimum 120.000 Km. For more information please contact

PULSTAR PLUGS SELLING TO EUROPE

Pulstar Spark Plugs use innovative plasma-assisted combustion technology to increase horsepower and torque.

Plasma-assisted combustion is already used to improve engine performance in race cars, but requires complex control systems and costs nearly $2,000 per cylinder. Pulstar Spark Plugs, manufactured by Enerpulse Technologies, brings plasma-assisted combustion to consumers with a simple spark plug upgrade. Pulstar uses a patented internal capacitor, developed with the help of a US DoE laboratory, to create a high-intensity electrical pulse that ionizes the air-fuel mixture and saturates it with combustion-enhancing plasma. With its plasma-assisted combustion, Pulstar ignites fuel instantly and burns it rapidly; gaining up to 7 horsepower, 9 ft.-lbs. of torque ... and, delivering wicked throttle response.

PULSTAR PLUGS IN GENERAL ARE AVAILABLE FOR ALL VEHICLE APPLICATIONS
WE MAKE CUSTOMIZED SALES.WHEN ORDERING PLEASE GIVE US ALL DETAILS ABOUT YOUR VEHICLE INCLUDING MODIFICATIONS MADE.

We will send you the most suitable PULSTAR PLUGS for your application.
We have been selling PULSTAR PLUGS for about 6 years that is since they appeared on the market

WE CAN SUPPLY COLDER and STRONGER PULSTAR PLUGS FOR RACING OR MODIFYED ENGINES

WE CAN SUPPLY PULSTAR PLUGS FOR ENGINE EQUIPPED WITH LPG OR CNG FUEL

SHIPPING TO EUROPE FAST AND RELIABLE

For more info pls contact
Mr. Cerasani Massimo
(TORQUE MASTER Europe)
Via A.Gramsci, 13
04010 Norma (LT) - ITALY
Tel +39 773 354553

E-mail info@torquemaster.biz

Cap and Rotor of the ignition distributor are often negletted, they do a very important work in order to distribute the high current sent by the ignition coil.The internal contacts wear out with time and kms done.It is therefore part of the maintenance to replace these parts regularly.Failure to do so will affect negativily the engine performance, fuel consuption and exhaust emission.

Important

Possibility (depending on the type of engine) to have High Quality Cap and Rotor for your Distributor Ignition free of charge with the purchase of the complete Kit.

NEW

Adaptor Towers for Ignition with 5mm cables example :Toyota - Mitsubishi -Daihatsu -

These adaptor towers enables you to convert your distributor cap to accept our special 8mm "ULTRA RACING" cables.Adaptor towers have a unique locking terminal that keeps the terminals firmly in place.

1. Install the adaptor Tower into the socket of the ditributor cap and push the Tower down to ensure good electrical contact against the socket terminal.

2. Snug the cap nut with pliers to expand the locking mechanism.Sligthly tug on the Tower making sure it is secure.Do not over-tighten!

IGNITION CABLES FOR LAMBORGHINI

(The photo on the right shows the Cable Set for model Jarama)

COMPLETE SET OF IGNITION CABLES FOR FERRARI

The photo on the right shows the Cable Set for

FERRARI

208-308 GT4

With the Cables we supply also the Spark Plug Connections "Resistive or non- Resistive".

On request we can supply you with new Coil -Cap and Rotor of the Ignition Distributor.

WE CAN SUPPLY WITH COMPLETE IGNITION SPARK PLUG CABLES (INCLUDING THE SPARK PLUG CONNECTIONS) FOR FERRARI.

THE CABLE SET IS MADE WITH THE SAME FEATURES OF ORIGINAL CABLES THAT IS THE SAME CONDUCTIVITY AND THE SAME EXTERNAL LOOK.

ON REQUEST WE CAN MAKE CUSTOMIZED CABLES TO IMPROVE CURRENT EFFICIENCY.

OUR PRICES ARE VERY CONVENIENT.